Macos Unzip Terminal

This instruction is only care how to install MacOS on WSL2, but not whether you have right permission to install MacOS on your device or not. (EULA)

Macos Terminal Unzip Password
Macos Unzip Terminal Free
Macos Unzip Rar Terminal

prerequirements
Setting WSL2
Enable KVM
set QEMU VM
create macOS-Simple-KVM on QEMU
Launch

Disclaimer This instruction is only care how to install MacOS on WSL2, but not whether you have right permission to install MacOS on your device or not. Netflix mac client. (EULA) Steps prerequirements Setting WSL2 Enable KVM set QEMU VM create macOS-Simple-KVM on QEMU Launch prerequirements KVM supporting Intel CPU. Application Security in MacOS 10.12 - 10.14¶ As of 10.12 (Sierra) the UI for disabling app security was removed. The functionality is still there, but must be enabled from the command line. To whitelist a single application (like an unzipped chirp-daily.app): unzip chirp.zip; control click on the unzipped application and select New Terminal at.

KVM supporting Intel CPU.
Device to install MacOS (that does not conflict with EULA)

First of all you need to check your Windows 10 version is greater than 2004 (means it was released at April 2020 in general).If you are not, then you update your Windows and come back here.
Then You can enable Windows Subsystem Linux at Control - Apps - Programs and Features - Turn Windows features on or off.
I have not enough idea that you will need Hyper-V feature for this work, but if you can, please enable Hyper-V and virtualization feature.
Then go to Microsoft Store. Install Ubuntu.(If you don’t want to use Ubuntu, then you can try any other linux. maybe. :) )
Sure you should set your Linux. Just follow instruction by starting Ubuntu app.At this moment you have the WSL but not WSL2.
After all, upgrade WSL to version 2. This official instruction is kind and easy enough.https://docs.microsoft.com/en-us/windows/wsl/install-win10

Congrats, you have WSL2 now! but it is just first step.

You may think it was dizzy work to set WSL2, but it is absolutely clear than this step. So, take a deep breath before start.
First you should get WSL2 Kernel codes. It is preferred to have code of released version. (I am using 4.19.104)https://github.com/microsoft/WSL2-Linux-Kernel
Before clone or unzip the code, you may need to set per-directory case sensitivity.Its quite hassle but if you skip this, you will fail to build after all!
Then extract( or clone) code somewhere you set case-sensitive.
Following below instruction. It cames from Accelerated KVM guests on WSL 2```bash$ sudo apt update && sudo apt -y upgrade$ sudo apt -y install build-essential libncurses-dev bison flex libssl-dev libelf-dev cpu-checker qemu-kvm aria2

$ tar -xf WSL2-Linux-Kernel-4.19.104-microsoft-standard.tar.gz$ cd WSL2-Linux-Kernel-4.19.104-microsoft-standard/

$ cp Microsoft/config-wsl .config$ make menuconfig

Let’s build! It takes an hour.
After-build setting:
Are you done? then make a .wslconfig on your windows user home directory (C:Users<username>).Below is assuming your build image was copied to user home directory.
Let’s get back to PowerShell(administrator).
You should check your Kernel(and CPU) support KVM in linux shell, after that.
If you cannot get some positive number after last line, then you are a unfortunate guy! (I did. haha)
If you are not, you can go to next step. Otherwise follow below steps.
You need WinDbg Preview in Microsoft store.
Get script from here: https://gist.github.com/steffengy/62a0b5baa124830a4b0fe4334ccc2606 (Thank you Steffengy!)get run-wsl.bat and script.js at same directory.
If you launch run-wsl.bat: then you will see WinDbg window and the WSL terminal after few seconds.now you can try below again!

You are using Windows as host, thus you may need to install X server on your Windows.
I installed vcXsrv by following this instruction. https://blog.nadekon.net/115(Korean)
It is preferred to add below line in your .bashrc.
We will use KVM, thus should import KVM modules every running. Adding belows to .bashrc are preferred.
Simply check setting is okay:

this steps are from https://computingforgeeks.com/how-to-run-macos-on-kvm-qemu/ . some are changed but note reference.
Let’s install requirements and code.
Get install disk from server.
make disk image.
add below disk options to ./basic.sh.
You will need to format disk, install macOS from internet, and setting your preferences with ‘Clover’.Details are described at the origin instruction.

when you run .basic.sh, you will see a window is opening via vcXsrv!
you may take 2 or more hours to install Catallina on your VM, after that, you are free to use MacOS VM.
Memory and Display settings might be uncomfortable, but you can find options easily from internet: keyword is QEMU mem/vga setting.

The Beginners Guide has general help. Click here for the Beginners Guide
If you need Mac-specific help, you are at the right page.

Join the Mailing list & search the archives for similar problem reports & how they were resolved, and/or ask the group. Please include enough info about the problem and situation so the community will be able to help you.

Not all functionality is supported on all radios. See Model Support

As of MacOS 10.9, signed packages are required by default. Apple charges for this capability, and requires use of their tooling to do it. For the time being, MacOS users may need to disable signed package checking for CHIRP. Instructions provided by Jim, K2SON:

Run windows on osx. To run Compose as a non-root user, see Manage Docker as a non-root user. Install Compose. Follow the instructions below to install Compose on Mac, Windows, Windows Server 2016, or Linux systems, or find out about alternatives like using the pip Python package manager or installing Compose as a container. Install a different version. LonelyScreen is a AirPlay receiver for Windows and MAC. It is like an Apple TV running on your desktop. You can cast anying from your iPhone or iPad to your computer screen just like a Apple TV. Jan 28, 2012 Make the last argument the path to the game executable which you wish to run. Executing this shortcut should then launch the game automatically. Under a linux / unix type system, the command would probably look similar to the following:./usr/bin/dosbox /games/settlers2/s2.exe; On OSX, use a command like this. It should be noted that you can run Windows on a Mac but cannot run macOS on a PC. Apple has also released a software kit called Bootcamp for running Windows on the Mac. Other software virtualization applications used to run Windows on Macs include Virtualbox and Parallels.

Locate the app in Finder.
Right click (control-click if you don't have a 2 button mouse) on the app and click Open.
You will get a dialog box about it being an unsigned app, click the Open button.
Enter an Administrator userid and password.
The app will now be flagged to allow it to be opened normally in the future.

Alternately, you can disable them for your entire system, although this has security implications that should not be ignored. Instructions for this provided by Tom, KD7LXL:

Open your System Preferences
Go to Security & Privacy, General tab.
Click the lock
Then choose Allow apps downloaded from: Anywhere.

As of 10.12 (Sierra) the UI for disabling app security was removed. The functionality is still there, but must be enabled from the command line.

To whitelist a single application (like an unzipped chirp-daily.app):

unzip chirp.zip
control click on the unzipped application and select New Terminal at Folder. (Don't see that menu item? Instructions to enable it)
run this command in the newly opened terminal window:

Alternately, you can disable them for your entire system, although this has security implications that should not be ignored. Run this command in a terminal:

references: single commandglobal

Unfortunately, Apple has made significant changes in 10.15 which cause major issues for independent software developers. CHIRP is significantly impacted and the future is unclear.

At the very least, Catalina users should use the 'unified' build of the app provided on the download page, which uses the system's 64-bit python runtime. Also note that there are significant limitations on what files unsigned applications can access which makes it very difficult to open, save, find, and otherwise organize image and CSV files with chirp. Please see issue #7147 for the current information about workarounds.

USB to serial cables are not merely wire, they contain small computer circuits at one end of the cable that respond as a USB device and convert the data to serial. These cables are not all the same, so the computer needs a software 'driver' so it can recognize the cable and speak to it correctly. You will need to install one of these 5 below.

FTDI cables¶

Note that with Mac OSX 10.9 'Mavericks', Apple provides their own driver for FTDI chipset. You may need to remove the OEM FTDI driver and use only the Apple FTDI driver, or you may need to disable the Apple FTDI driver and install the OEM FTDI drivers. YMMV.

http://www.ftdichip.com/Drivers/VCP.htm
Version 1.5.1 is available for Mac OS X on 64 bit, 32 bit and PPC machines.

Prolific PL-2303 cables - official drivers for the genuine Prolific cables¶

FYI: your cable, if using Prolific chipset, is more likely to be using a counterfeit chip than an original.

http://www.prolific.com.tw/US/CustomerLogin.aspx
Login as guest/ guest & look in the Support section. Specified to work with Mac OSX 10.6, 10.7, & 10.8.

Generic PL-2303 cables (counterfeit and/or “Generic”) If you aren't sure what kind of inexpensive cable you have, try this one first.¶

For Lion (10.7.x), Mountain Lion (10.8.x), and Mavericks (10.9.x):¶

You can try this one, which install open source pl2303 driver and remove any other driver versions:
http://1drv.ms/Nl68Ru At this web page you may need to right-click or control-click to link to get it to download. After downloading, you may need to control-right click, then open in order to bypass Mac Gatekeeper.

For earlier versions of Mac OS X up to 10.5 Leopard. Also some reports of success with Snow Leopard, Lion:¶

RTSystems cables¶

for OSX 10.9.x (aka Mavericks):¶

see RTSystemsCablesAndMavericks

for OSX < 10.9.x:¶

https://www.rtsystemsinc.com/kb_results.asp?ID=9
http://www.rtsystems.us/downloads/MacDrivers/RTSystemUSBSerialDrivers.pkg.mpkg.zip

Silicon Labs CP210x USB to UART Bridge VCP Drivers (including Kenwood TH-D72)¶

http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Macintosh OSX driver for the Intel and PowerPC Platforms versions 10.4, 10.5, 10.6, 10.7, 10.8, and 10.9.

WinChipHead CH340 series chipset¶

The WinChipHead CH340 series chipset is not compatible with the Prolific 2303 drivers. This chipset will report a Product ID of 0x7523 and a Vendor ID of 0x1a86. A signed driver compatible with Yosemite is available from http://blog.sengotta.net/signed-mac-os-driver-for-winchiphead-ch340-serial-bridge/ as the driver offered on the manufacturer's website (in Chinese) is not signed and requires allowing unsigned kernel extensions, which is a significant security risk on OS X.

In many cases you need to connect the cable to the radio first, then power the radio on, while holding down some buttons. The exact procedure varies by radio.
Some radios need to be put into a 'clone' mode to transfer to PC, some radios may need to be configured to use the mic/speaker jacks for PC transfer instead of for the speaker/mic. The exact procedure varies by radio.
You will need to download from the radio to CHIRP first, before uploading anything to the radio. CHIRP creates a template from the radio download so it knows how to talk to the radio.
If you want to download from one radio and upload those settings to another radio, first download from each radio to a separate “tab” of CHIRP. Then copy/paste from one tab to the other & upload back to the same radio that produced that tab. Do not try to upload to a radio directly from a tab that was not downloaded from that same radio.
Many USB to serial cables include a counterfeit Prolific chip. This can cause connection problems because the official Prolific driver will ignore the counterfeit chip. Some people have reported success by using an older version of the Prolific driver, or a 3rd party driver.
If you are using multiple USB cables, each will create a different “virtual port”, meaning that you will need to select the correct virtual port for your radio when connecting to your radio. CHIRP will give you this opportunity each time you download from the radio.
If CHIRP won’t launch & won't run, you may have neglected to install the Python runtime. CHIRP needs that. Even though Mac OS X includes Python built-in, the runtime has to be installed is because it includes PyGTK and some other libraries that Chirp requires, in addition to Python itself: http://www.d-rats.com/download/OSX_Runtime/
If your radio is not 'Supported', you can try downloading the newest Daily Build to see if support was recently added.

You can verify that the drivers are installed & working by connecting the USB cable to your Mac, then running “System Profiler”, or “System Information” (found in /Applications/Utilities ). When the USB cable is connected and drivers correctly installed, the cable will show up in the USB section of the System Profiler.

Macos Terminal Unzip Password

Another way to see that the driver is correctly installed is to open Terminal and type:

It will return a list of virtual serial ports including something similar to:

You may also type:

That will return a long list of kexts, including something similar to this at the bottom (most recently installed are listed last):